Kit 15 Pool Connections for Above Ground Swimming pools. When installing an above ground pool, you may find it confusing to attach all the different hoses as each pool/pump and filter and heat pump comes with different connections.
At Heatpumps4Pools Ltd we have tried to make this task as easy as possible but there are a few different factors to take into account. The basic layout should look like the picture below. We have labelled the 6 connection points so that we can advise where the pieces of the Kit is to be positioned 1-6. Please see below for this information. Heat Pumps this can be used with Kit 15 Pool Connections.
This kit is ideal for the use with a an above ground pool that has 38mm connections. When a 38mm iFlo 500 Sand Filter with the following Heat Pumps.
The Kit 15 Pool Connections includes the following. 2 x Adaptor A (Connections 1 & 6).
4 x 38mm Threaded Hosetails (Connections 2,3,4 & 5). 7.5m of 38mm Hose i. E 7.5m (Connections 1-2, 3-4, 5-6) which will cover a distance of 3m for the heat pump away from the pool. 6 x Jubilee Clips (Use at each end of the 38mm Hose - Connections 1-2, 3-4, 5-6). 1/Use 1 x long piece of hose between the pool and pump and filter - 2 Lengths (Connections 1-2). 2/Use 1 x short piece of hose between the Pump and Filter and the Heat Pump - 1 Lengths (Connections 3-4). 3/Use 1 x long piece of hose between the heat pump and pool - 2 Lengths (Connections 5-6).Hose can vary as each length comes in either 1.5m/1m lengths. (Use at each end of the 38mm Hose - Connections 1-2, 3-4, 5-6). 4 x 38mm Threaded Hosetails.
Kit 15 Pool Connections Fitting Guide. 2 x Adaptor A is to be screwed on both the Inlet/Outlet of the Pool (Connections 1 & 6). 4 x 38mm Threaded Hosetails are to be screwed into the heat pump and the Pump/Filter on both the inlet and the outlet connections (Connections 4-5). Place 2 Jubilee Clips on to each length of Hose x 3.
The 3 lengths 38mm Hose is to be positioned as follows : Use 1 x long piece of hose between the pool and pump and filter (Connections 1-2), Use 1 x short piece of hose between the Pump and Filter and the Heat Pump (Connections 3-4). Use 1 x long piece of hose between the heat pump and pool (Connections 5-6). The 6 Jubilee Clips are to be tightened on the outside of the Hose accordingly to secure the hose (Connections 1-2, 3-4, 5-6). However sometimes in very busy periods there may be a delay from suppliers on some of the parts needed for these kits - so we will update the website when this situation occurs. These items are in stock in the UK ready for immediate dispatch. For more information, also see our FAQs page. We will deliver to anywhere in the UK. Please message us for a quotation to deliver to other countries. HeatPumps4Pools are the leading UK based specialist supplier of heat pumps and related pool products.Operating from Basildon in Essex in the UK, we are the leading specialist supplier of swimming pool heat pumps to the UK and Europe. We have a wide range of the best swimming pool heat pumps to suit any pool size and type. We are always happy to offer free friendly advice on the best heating solution for your pool.
We are happy to provide free pre and post sales support. Customers are also welcome to visit us in our offices in Basildon Essex.