Bestway Digital Pool Heater 2.8kW Pools up to 15 Foot Swimming Pools

Bestway Digital Pool Heater 2.8kW Pools up to 15 Foot Swimming Pools
Bestway Digital Pool Heater 2.8kW Pools up to 15 Foot Swimming Pools
Bestway Digital Pool Heater 2.8kW Pools up to 15 Foot Swimming Pools

Bestway Digital Pool Heater 2.8kW Pools up to 15 Foot Swimming Pools

Bestway Pool Heater is a simple and effective way to warm up water in your above ground pool, creating a comfortable and relaxing environment to swim, paddle or play in. The outdoor pool heater is ideal for use with Bestway pools measuring 15ft or smaller however can be used with bigger pools to slightly less effect.

The electric pool heater has two hose outlets, one of which connects it to a filter pump and the other to your above ground pool. Clear, clean and pristine water is pumped into the above ground pool heater via the filter pump, where it's then heated and pumped back into the pool. The swimming pool heating system is compatible with filter pumps and sand filters with a flow rate of 1,000 gal/hr (3,785L) or less. The swimming pool heater, which has a 4m power cord to plug it into to an electrical outlet, comes with all the necessary hoses and attachments, ensuring a swift and simple set up. Depending on your pool size and your preferred temperature the pool heater can take anywhere between 12 hours to 3 days to warm the water. The swimming pool heater has the ability to increase water temperature by approximately 0.5°C to 1.5°C per hour. Once again, this varies from pool size to pool size. Specifications: 220-240V 50Hz, Class II. Compatible with swimming water capacity of 400 - 4,500 gal (1,520-17,035L).

Energy: 2,800W at 20°C. Ideal for use with 15ft pools or smaller. Can be used with bigger pools but heating less effective.

Compatible with pumps and sand filters with a flow rate of 1,000 gal/hr or less. Compatible with filter pumps & sand filters.

Power Cable Length: 4m approx. X1 Accessories and attachments for the hose. At Pure Garden we aim to pick, pack and dispatch your order same day, however at peak times this process can take up to 24 hours. Your order will be dispatched via one of the major UK couriers which ever is more appropriate. International courier deliveries - please get in touch for details. You may cancel your order and return it within 30 days. Please see our terms and conditions for full details. About Our Assembly & Installation Service.

So youve chosen your shed and you want it assembled and thats where our installers come in. At Pure Garden Buildings, we offer a professional installation service taking the pressure off you. So if you require a shed installation in your garden or youre an Architect, Developer, Business, School or Government Body we can take care of the build process for you.

Simply Choose the Assembly option when placing your order or speak to one of our team to book your installation. After you have placed an order and booked your installation then the install team will be in contact to make the necessary arrangements with you for your install. Installation FAQs (Frequently Asked Questions). How long do I have to wait for an install?

My install is due, what happens now? Fantastic stuff, your building will have already been delivered may be coming with the installer, if your building is delivered to you prior to the install date please check off the contents from the list on the instructions to make sure everything is present and correct. Although we try and make sure everything is perfect we are all only human after all, so we ask you to quickly check and get in touch if you have any concerns so we can sort them out before the installer arrives. We will pre-book an installation date with you in advance if you are not able to be in or grant access, then please let us know in advance or arrange for a friend or neighbour to be there in your place.

My install is due today, what can I expect? Your installer(s) should arrive within the timeframe agreed (if there is an unavoidable delay then will notify you as soon as reasonably possible). When the installer/s arrive they will just double check that your base is suitable and everything is present for the installation, then they will start the erection process of your building for you. The installers will be happy to answer any questions you may have. If you want to oversee the build they are more than happy for you to be there.

If you want to get on and leave them to it, they will be able to give you an estimated time that the install should be nearing completion. My installation is complete, is that it?

Yes, youre good to go! The installer will do their own checks of the building and then ask you to have a look with them, they will show you the completed job, take some photographs and ask you to sign for their work. So there are no surprises on the day please read the following information about what is required. Our base prices for installation make the following assumptions.

There is clear access to the garden or assembly site. Although we can move the shed from one point to another for you, the price quoted only allows for a certain amount of time. Long distances like rear access from further down a street, etc. Will take more time that has not been quoted for in the standard price. The ground is flat (not sloping for base kits).

A solid and suitable base is in place and that base is both flat and level. (for more information please see our Shed Base Guide). There is access (min 60cm) all around the final install position (the install team will need to get to all sides of the shed to properly install the roof).

Electricity must be available upon request. There is parking or a suitable loading/unloading area at the assembly address with free parking close by. Permit holders only roads will require you to provide a permit. Unless agreed in advance a person over the age of 18 must be available at the time of assembly. The customer is responsible for and understands the following.

We are unable to carry a shed through your property. If a shed or garden building must be taken through a home then you will need to already have done this before the assembly team arrives or upon arrival. If the assembly person or team arrives to find the base is not suitable, the job may not be able to go ahead on that day, but the booking will still have to be paid in full. If we are asked to and agree to install on a base that is not suitable, then we do so on the understanding that you acknowledge this may affect the look and functionality of the building and we will not be held liable for issues that arise as a result.

The installer/s are unable to carry out other jobs or repairs for you while they are there. If you have pets, the area must be free of any mess and properly cleaned before the assembly taking place.

We may ask for dogs to be kept away from the area while the assembly is taking place. That are overhanging must be cut back prior to our arrival.

Grass must be reasonably short around the assembly site. Manholes and drains in the area must be covered, free from mess and clean. Assembly of timber base kits assumes the following. Although we will make every effort to accommodate requests, these are best made in advance so there is no delay in the assembly service or unexpected surprises on the day.

Please understand that our standard pricing is simply for the assembly of a retail product and nothing else (Our installers are not builders, carpenters or electricians) and can not perform other tasks for you. The item "Bestway Digital Pool Heater 2.8kW Pools up to 15 Foot Swimming Pools" is in sale since Wednesday, April 10, 2019.

This item is in the category "Garden & Patio\Swimming Pools & Hot Tubs\Pool Equipment & Parts\Pool Heaters & Solar Panels". The seller is "samjoe1981" and is located in Folkestone. This item can be shipped to United Kingdom.
Bestway Digital Pool Heater 2.8kW Pools up to 15 Foot Swimming Pools